How to Program a 2006 – 2014 Honda Ridge line Key-less Entry Remote Fob

Step by Step How to Program Instructions:

This is to program the remote portion of your Honda Ridge line remote yourself with these simple instructions.

YOU NEED A WORKING/PROGRAMMED KEY THAT WILL START YOUR CAR FOR THIS PROCEDURE.

 MAKE SURE ALL DOORS ARE CLOSED

1. Turn ignition to ON

2. Within 1 to 4 seconds, push the transmitter lock or unlock button (with the transmitter pointed at the instrument panel)

3. Within 1 to 4 seconds, turn ignition switch to OFF

4. Within 1 to 4 seconds, turn ignition switch to ON

5. Within 1 to 4 seconds, push the transmitter lock or unlock button (with the transmitter pointed at the instrument panel)

6. Within 1 to 4 seconds, turn ignition switch to OFF

7. Within 1 to 4 seconds, turn ignition switch to ON

8. Within 1 to 4 seconds, push the transmitter lock or unlock button (with the transmitter pointed at the instrument panel)

9. Within 1 to 4 seconds, turn ignition switch to OFF

10. Within 1 to 4 seconds, turn ignition switch to ON

11. Within 1 to 4 seconds, push the transmitter lock or unlock button (with the transmitter pointed at the instrument panel)

12. Confirm that you hear the sound of the door lock and unlock actuators. Within 1 to 4 seconds, push the transmitter lock or unlock button again

13. Within 15 seconds, aim the transmitters (up to 3) whose codes you want to store at the instrument panel and press lock or unlock button. Confirm that you hear the sound of the door lock and unlock actuators after each transmitter code is stored. NOTE: you must do all this for all the transmitters.14. Turn the ignition to OFF and remove the key 15. Confirm operation of the new code on each transmitter